Although it is true that custom made arch support insoles for those who have flat feet must be made by a licensed professional, it is actually possible to make handmade orthotics at home. However, these types should only be made for those whose flat foot condition is not too severe. Basically, the homemade ones can be made for those who have low arches in order to stay safe.
Now before one would want to make one of these things, he would first have to get hand of certain materials. Now the most important thing that he would need would be some insoles probably from other shoes that he does not use anymore. Just make sure that all sizes of these things are more or less the same or similar.
Once these soles have already been gotten, then the very next thing to do would be to get some glue. One is recommended to use super glue for this kind of project because super glue is very efficient and dries fast. However, if one does not have super glue in his house, then he may use some other sticky glue that is waterproof.
So after getting the old insoles, one has to now do a bit of measurements. Always do make sure that all insoles have the same size so that it will be easier to place them on each other. So when one puts one insole on top of the other, he has to find the part that holds the arch of the foot.
When it is has been found, cut that part out from only one of the soles. In other words, cut out that part of one sole and make sure that the other sole is whole. From there, glue the one that was cut to the one that is whole using the super glue or the waterproof glue.
After that has already been done, then one just has to wait for the glue to dry before he tries it out. Of course as stated above, the best glue for this type of project would be super glue. It is this glue that is the stickiest as well as the most effective and it dries really fast.
Now if one would want to make his arch support taller than it already is, he can actually do so by adding another sole part to the insole. Now he has to get the third insole and just what he did a while ago. Once he has done that, he just once again has to let the glue dry and then try to walk with it.
So as one can see, it is actually very easy to make handmade orthotics at home. However, if one has a really bad condition of flat feet, then it is better that he would just buy a custom made one. However, if he just has a low arch or is an athlete that needs one that will help him in his sports, then a handmade one will already suffice.
Now before one would want to make one of these things, he would first have to get hand of certain materials. Now the most important thing that he would need would be some insoles probably from other shoes that he does not use anymore. Just make sure that all sizes of these things are more or less the same or similar.
Once these soles have already been gotten, then the very next thing to do would be to get some glue. One is recommended to use super glue for this kind of project because super glue is very efficient and dries fast. However, if one does not have super glue in his house, then he may use some other sticky glue that is waterproof.
So after getting the old insoles, one has to now do a bit of measurements. Always do make sure that all insoles have the same size so that it will be easier to place them on each other. So when one puts one insole on top of the other, he has to find the part that holds the arch of the foot.
When it is has been found, cut that part out from only one of the soles. In other words, cut out that part of one sole and make sure that the other sole is whole. From there, glue the one that was cut to the one that is whole using the super glue or the waterproof glue.
After that has already been done, then one just has to wait for the glue to dry before he tries it out. Of course as stated above, the best glue for this type of project would be super glue. It is this glue that is the stickiest as well as the most effective and it dries really fast.
Now if one would want to make his arch support taller than it already is, he can actually do so by adding another sole part to the insole. Now he has to get the third insole and just what he did a while ago. Once he has done that, he just once again has to let the glue dry and then try to walk with it.
So as one can see, it is actually very easy to make handmade orthotics at home. However, if one has a really bad condition of flat feet, then it is better that he would just buy a custom made one. However, if he just has a low arch or is an athlete that needs one that will help him in his sports, then a handmade one will already suffice.
About the Author:
You can visit www.customorthoticfootbeds.com for more helpful information about Making A Pair Of Handmade Orthotics.
0 commentaires:
Enregistrer un commentaire