When the filtering layer begins to clog need cleaning it, which happens every 4 to 6 weeks. The cleaning is manual and involves removing the first layer of sand, sand washing in separate tubs and in reconstruction of filter bed. Quick filters are the most used, particularly in combination with other treatments such as clarification (surface waters) and the removal of iron and manganese (deep waters), and can deal with an input flow rate 40 times higher than that of lens filters (survival water purification systems).
Quick filters are identical to those lenses; only varies the thickness of material forming the filter bed and the mattress filtering, in order to make faster the speed of filtration, equal to 5-10 m / hour. In this case the filtration is mechanical. For quick filters as a rule are used leach monolayer (single media) consisting of quartz sand (50-80 cm thick) supported by a mattress filter, or a drainage layer, consisting of coarser material (such as gravel) the thickness.
Filtration is a treatment used to remove suspended solids from the waters not sediment. Treatment consists in passing the raw waters through a filter medium (bed / filter layer or filter cloth). In case of filter layer, the filter material can be made from quartz sand, anthracite or activated charcoal. During filtration the filtered solids gradually begin to clog the filtering layer resulting in an increase of load losses, which is increased to overcome the supply pressure. Exceeded the maximum value of said pressure must be made to interruption of flow and to cleaning of filter medium.
However, the fact that the waters is by nature a solvent makes it somewhat problematic the effective elimination of many unwanted substances. The waters is entered into a tank head from which it originated the system of waters supply - drinking. The waters containing different types of organic substances and inorganic, hereinafter classified, that must be removed during the purifying treatment. Physical treatments simple: they are articulated in a single step, eliminating the suspended solids and sediments those not coarse sediments (screening and sedimentation) and non-settleable (sieving and filtration).
Physical and chemical treatments normal and driven: they are divided into several phases and eliminate non-settleable suspended solids (flocculation) and correct the chemical characteristics of waters by eliminating the dissolved substances that are incompatible with the use to which the waters is bound (softening, stabilization, removal of iron, manganese, desilication, fluoridation and defluoration, aeration).
Filter volume: the filtration takes place by means of a three-dimensional porous matrix said filter bed consisting of discrete materials of small dimensions (eg. Sand); in this case the particles are retained within filter medium. The effectiveness of a filter material depends on certain properties of particles such as size, shape and surface chemistry. The filters lenses are the first filtration system used in filtration, but they are currently little used. The slow filtration can be used in case of turbidity 10 ppm.
The waters containing sediments that can create several problems during the cycle of filtration. This law is valid for strictly spherical particles immersed in a liquid at rest and at constant temperature where the downward motion is not influenced neither by the presence of other particles or from the container walls.
The sedimentation is carried out in special tanks, called decanters, within which the waters moves in a laminar flow as possible for a time sufficient to allow the sedimentation of heavier particles. Decanters flow or vertical upward flow are generally circular section. Inse tanks the entrance of waters can be centrally from above; in this case waters, to be able to escape from the tank itself is forced along a tortuous path; in fact must first move vertically downwards in order to pass beneath a baffle concentric, said fireplace, subsequently, passed over the obstacle fireplace, must rise and exceed a weir located along the perimeter of tub.
Quick filters are identical to those lenses; only varies the thickness of material forming the filter bed and the mattress filtering, in order to make faster the speed of filtration, equal to 5-10 m / hour. In this case the filtration is mechanical. For quick filters as a rule are used leach monolayer (single media) consisting of quartz sand (50-80 cm thick) supported by a mattress filter, or a drainage layer, consisting of coarser material (such as gravel) the thickness.
Filtration is a treatment used to remove suspended solids from the waters not sediment. Treatment consists in passing the raw waters through a filter medium (bed / filter layer or filter cloth). In case of filter layer, the filter material can be made from quartz sand, anthracite or activated charcoal. During filtration the filtered solids gradually begin to clog the filtering layer resulting in an increase of load losses, which is increased to overcome the supply pressure. Exceeded the maximum value of said pressure must be made to interruption of flow and to cleaning of filter medium.
However, the fact that the waters is by nature a solvent makes it somewhat problematic the effective elimination of many unwanted substances. The waters is entered into a tank head from which it originated the system of waters supply - drinking. The waters containing different types of organic substances and inorganic, hereinafter classified, that must be removed during the purifying treatment. Physical treatments simple: they are articulated in a single step, eliminating the suspended solids and sediments those not coarse sediments (screening and sedimentation) and non-settleable (sieving and filtration).
Physical and chemical treatments normal and driven: they are divided into several phases and eliminate non-settleable suspended solids (flocculation) and correct the chemical characteristics of waters by eliminating the dissolved substances that are incompatible with the use to which the waters is bound (softening, stabilization, removal of iron, manganese, desilication, fluoridation and defluoration, aeration).
Filter volume: the filtration takes place by means of a three-dimensional porous matrix said filter bed consisting of discrete materials of small dimensions (eg. Sand); in this case the particles are retained within filter medium. The effectiveness of a filter material depends on certain properties of particles such as size, shape and surface chemistry. The filters lenses are the first filtration system used in filtration, but they are currently little used. The slow filtration can be used in case of turbidity 10 ppm.
The waters containing sediments that can create several problems during the cycle of filtration. This law is valid for strictly spherical particles immersed in a liquid at rest and at constant temperature where the downward motion is not influenced neither by the presence of other particles or from the container walls.
The sedimentation is carried out in special tanks, called decanters, within which the waters moves in a laminar flow as possible for a time sufficient to allow the sedimentation of heavier particles. Decanters flow or vertical upward flow are generally circular section. Inse tanks the entrance of waters can be centrally from above; in this case waters, to be able to escape from the tank itself is forced along a tortuous path; in fact must first move vertically downwards in order to pass beneath a baffle concentric, said fireplace, subsequently, passed over the obstacle fireplace, must rise and exceed a weir located along the perimeter of tub.
About the Author:
You can visit defpg.com for more helpful information about Guide To Survival Water Purification Systems.
0 commentaires:
Enregistrer un commentaire