Dear Health-Conscious Reader,

It seems every time you open a newspaper, turn on the TV or browse the Internet, you hear about a new discovery proving that the healthy foods we eat can prevent disease and slow aging.!!!!!!!!!!!!!

But you don’t have to look much further to find the dark side of the story – the rates of obesity and diet-related diseases are skyrocketing Click Here!

ads

What You Should Know About Military Antennas

By Patty Goff


A radio antenna (or just aerial) is a transducer that can send and receive radio waves (electromagnetic waves) designed for radio, TV, cell phones, radar or satellite. A radio antenna is a transducer with a usable efficiency can perform one or both of these energy conversions: marketable alternating electrical energy for transmission of radio wave energy. Marketable radio wave energy to alternating electrical energy (military antennas).

This parameter is defined as the ratio between the maximum radiated power in a geometric direction and power radiated in opposite direction. When this relationship is reflected in dB scale, the ratio F / B (Front / Back) is the difference in dB between the maximum radiation level and radiation level of 180 degrees. This parameter is especially useful when interference back is critical in choosing the antenna that we use.

This relationship also can be seen from another point of view, indicating how good the antenna in the rejection of signals from the rear. Rarely is really important, because the interference from the rear do not usually happen, but it can happen. The F / B ratio is not a very useful number because often varies greatly from one channel to another. Of course, if it is the radiation pattern, then the F / B is not needed.

Bandwidth is a frequency range in which the antenna parameters meet certain characteristics. Can define impedance bandwidth, polarization, gain or other parameters. Directivity is the impedance of masts at its terminals. It is the relationship between the voltage and the input current. Z = frac V I. The impedance is a complex number. The real part of an impedance is called mast resistance and the imaginary part is reactance.

If the antenna is replaced by the radiation resistance, this would do their job, ie, would produce the same amount of power that the antenna would radiate. The radiation resistance is equal to the ratio of the power radiated by the aerial divided by the square of the current in its feed point. One could obtain an mast efficiency, given that is the ratio of the radiated power and the dissipated power.

There are three basic types of transmitters: wire, aperture and planar antennas. Also, clusters of these aerials (arrays) are usually considered in the literature as another basic type of antenna. Wire transmitters are variants whose radiating elements are wire conductors having a negligible section relative to wavelength employment.

The dimensions are generally a maximum wavelength. It is widely used in the bands of MF, HF, VHF and UHF. You can find wire antenna arrays. Examples of wire antennas are: the vertical monopole, the dipole and its evolution, the Yagi, loop antenna and the helical antenna is a special type of antenna that is used primarily on VHF and UHF. It describes a helix conductor, thereby producing a circular polarization.

The characteristics of an antenna depends on the relationship between the dimensions and the wavelength of a signal transmitted or received radio frequency. If the masts dimensions are much smaller than the wavelength are called elementary antennas, whether they have dimensions of order of a half wavelength resonating and if its size is much larger than the wavelength are directives.




About the Author:



0 commentaires: